Document

TS005-2.0.0 Remote Multicast Setup

Issue link: https://read.uberflip.com/i/1464684

Contents of this Issue

Navigation

Page 3 of 20

LoRaWAN ® Remote Multicast Setup Specification TS005-2.0.0 ©2022 LoRa Alliance ® Page 4 of 21 The authors reserve the right to change specifications without notice. 1 Conventions 117 118 The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", 119 "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" 120 in this document are to be interpreted as described in IETF Best Current Practice 14 (BCP14 121 [RFC2119] [RFC8174]) when, and only when, they appear in all capitals, as shown here. 122 123 The tables in this document are normative. The figures and notes in this document are 124 informative. 125 126 Document titles are written as LoRaWAN Link Layer Specification and sections within a 127 document are written as "Frequency-Hopping Beacon Transmission". 128 Commands are written PackageVersionReq, bits and bit fields are written 129 PackageIdentifier, constants are written RECEIVE_DELAY1, variables are written N. 130 In this document: 131 • The octet order for all multi-octet fields SHALL be little endian. 132 • EUI are 8-octet fields and SHALL be transmitted as little endian. 133 • By default, RFU bits are Reserved for Future Use and SHALL be set to 0 by the 134 transmitter of the packet and SHALL be silently ignored by the receiver. 135

Articles in this issue

view archives of Document - TS005-2.0.0 Remote Multicast Setup