WHITE PAPER
Strategies for Deploying Xilinx's Zynq UltraScale+ RFSoC
mrcy.com 8
SOFTWARE AND IP DESIGN
With each new family of FPGA, there has been a constant
progression towards more powerful processing solutions.
Each new family adds more logic density, faster logic fabric,
more DSP resources, more on-chip memory, faster interface
and now with RFSoC high sample rate A/D and D/A converters.
While these new capabilities are certainly welcome, and
they do enable more and more complex applications to be
targeted at FPGAs, they also raise the bar for better and more
capable design tools to handle the increasing complexity and
size of the new IP that can be created. Xilinx has addressed
the design tool challenge with their Vivado® Design Suite.
It includes tools for every aspect of the design cycle. The
latest version has improvements in performance with faster
routing and more efficient FPGA resource usage allowing
denser designs. Vivado also addresses the increasing design
complexity challenges with tools for creating processing
IP with C-language specification, an integrated software
development kit that targets the ARM processors, and
plug-and-play block diagram based IP integration with IP
Integrator. While all of these tool improvements go a long
way in enabling both software and IP engineers, the job of
creating a complete system solution can be greatly accelerated
when manufacturers of FPGA based hardware products
provide IP and software libraries to support the specific
features of the hardware. The better the manufacturer can
provide a foundation of software and IP for the engineer
to build their application on, the faster the engineer can
complete the job of producing a final, robust system.
All Mercury hardware products include a full suite of
FPGA based functions allowing the product to be used
immediately in a range of applications without the need to
create any FPGA IP. For all of our A/D or D/A based products
the functions can include data acquisition and waveform
generator engines, data tagging and metadata creation,
VITA-49 packet creation, digital downconverters, multi-
channel and multi-board synchronization, optimized DMA
for moving data on and off board through PCIe or 10GigE,
in addition to IP targeted at specific applications.
RFSoC again brings new challenges and solutions with
the sheer amount of data the A/D and D/A converters can
introduce and the minimum latency interfaces between
data converters and programmable logic in time critical
Figure 9
Navigator FDK allows FPGA engineers to access the board design in IP Integrator