Issue link: https://read.uberflip.com/i/1479525
LoRaWAN® Regional Parameters RP002-1.0.4 ©2022 LoRa Alliance ® Page 33 of 101 The authors reserve the right to change specifications without notice. DRcurrent DRnext Comment 0 NA Already the lowest data rate 1 0 2 1 3 2 4 3 5 4 6 5 7 6 8 0 9 8 10 0 11 10 Table 9: EU863-870 data rate back-off 590 EIRP 15 refers to the Equivalent Isotropically Radiated Power, which is the radiated output 591 power referenced to an isotropic antenna radiating power equally in all directions and whose 592 gain is expressed in dBi. 593 TXPower Configuration (EIRP) 0 Max EIRP 1 Max EIRP – 2dB 2 Max EIRP – 4dB 3 Max EIRP – 6dB 4 Max EIRP – 8dB 5 Max EIRP – 10dB 6 Max EIRP – 12dB 7 Max EIRP – 14dB 8..14 RFU 15 Defined in [TS001] Table 10: EU863-870 TXPower 594 By default, the Max EIRP is considered to be +16 dBm. If the end-device cannot achieve 16 595 dBm EIRP, the Max EIRP SHOULD be communicated to the Network Server using an out-of- 596 band channel during the end-device commissioning process. 597 2.4.4 EU863-870 Join-Accept CFList 598 The EU863-870 band LoRaWAN implements an OPTIONAL CFList of 16 octets in the Join- 599 Accept message for both CFListType 0 and CFListType1. When receiving a CFListType 600 1, it SHALL be interpreted according to the channel list definition in Section 2.3.2.1 (800 MHz 601 Fixed Channel List Definition). 602 603 15 ERP = EIRP – 2.15dB; it is referenced to a half-wave dipole antenna whose gain is expressed in dBd.