Document

RP002-1.0.4 Regional Parameters

Issue link: https://read.uberflip.com/i/1479525

Contents of this Issue

Navigation

Page 53 of 100

LoRaWAN® Regional Parameters RP002-1.0.4 ©2022 LoRa Alliance ® Page 54 of 101 The authors reserve the right to change specifications without notice. 1048 Data Rate UplinkDwellTime=0 UplinkDwellTime=1 M N M N 0 59 51 N/A N/A 1 59 51 N/A N/A 2 59 51 19 11 3 123 115 61 53 4 230 222 133 125 5 230 222 230 222 6 230 222 230 222 7 58 50 58 50 8 61 53 61 53 9 137 129 137 129 10 230 222 230 222 11 230 222 230 222 12 230 222 230 222 13 230 222 230 222 14:15 Not defined Not defined Table 35: AU915-928 maximum payload size (repeater compatible) 1049 For AU915-928, DownlinkDwellTime SHALL be set to 0 (no limit). The 400ms dwell time 1050 MAY apply to uplink channels depending on the local regulations. 1051 If the end-device will never operate with a repeater, the maximum application payload length 1052 in the absence of the OPTIONAL FOpts control field SHALL be: 1053 Data Rate UplinkDwellTime=0 UplinkDwellTime=1 M N M N 0 59 51 N/A N/A 1 59 51 N/A N/A 2 59 51 19 11 3 123 115 61 53 4 250 242 133 125 5 250 242 250 242 6 250 242 250 242 7 58 50 58 50 8 61 53 61 53 9 137 129 137 129 10 250 242 250 242 11 250 242 250 242 12 250 242 250 242 13 250 242 250 242 14:15 Not defined Not defined Table 36: AU915-928 maximum repeater payload size (not repeater compatible) 1054 1055 1056

Articles in this issue

view archives of Document - RP002-1.0.4 Regional Parameters