Issue link: https://read.uberflip.com/i/1479525
LoRaWAN® Regional Parameters RP002-1.0.4 ©2022 LoRa Alliance ® Page 76 of 101 The authors reserve the right to change specifications without notice. DRcurrent DRnext Comment 0 NA Already the lowest data rate 1 0 2 1 3 2 4 3 5 4 Table 70: KR920-923 data rate back-off 1526 1527 TXPower Configuration (EIRP) 0 Max EIRP 1 Max EIRP – 2dB 2 Max EIRP – 4dB 3 Max EIRP – 6dB 4 Max EIRP – 8dB 5 Max EIRP – 10dB 6 Max EIRP – 12dB 7 Max EIRP – 14dB 8..14 RFU 15 Defined in [TS001]Error! Bookmark not defined. Table 71: KR920-923 TXPower 1528 EIRP refers to the Equivalent Isotropically Radiated Power, which is the radiated output power 1529 referenced to an isotropic antenna radiating power equally in all directions and whose gain is 1530 expressed in dBi. 1531 By default, the Max EIRP is considered to be +14 dBm. If the end-device cannot achieve 14 1532 dBm EIRP, the Max EIRP SHOULD be communicated to the Network Server using an out-of- 1533 band channel during the end-device commissioning process. 1534 When the device transmits in a channel whose frequency is <922 MHz, the transmit power 1535 SHALL be limited to +10 dBm EIRP even if the current transmit power level set by the Network 1536 Server is higher. 1537 2.11.4 KR920-923 Join-Accept CFList 1538 The KR920-923 band LoRaWAN implements an OPTIONAL CFList of 16 octets in the Join- 1539 Accept message for both CFListType 0 and CFListType 1. When receiving a CFListType 1540 1, it shall be interpreted according to the channel list definition in Section 2.3.2.1 (800 MHz 1541 Fixed Channel List Definition). 1542 1543