Issue link: https://read.uberflip.com/i/1479525
LoRaWAN® Regional Parameters RP002-1.0.4 ©2022 LoRa Alliance ® Page 26 of 101 The authors reserve the right to change specifications without notice. 1.3.2 Fixed Channel Plan Regions 409 410 Plan US915 AU915 Default Freq Band 902 to 928 MHz 915 to 928 MHz Mandatory Channel Freq (Join Req) upstream: 64 (902.3 to 914.9 [+ by 0.2]) + 8 (903.0 to 914.2 [+ by 1.6]) downstream: 8 (923.3 to 927.5 [+ by 0.6]) upstream: 64 (915.2 to 927.8 [+ by 0.2]) + 8 (915.9 to 927.1 [+ by 1.6]) downstream: 8 (923.3 to 927.5 [+ by 0.6]) JoinReq DataRate [MinDR:MaxDR] 64 (125 kHz channels) using DR0 and 8 (500 kHz channels) using DR4 64 (125 kHz channels) using DR2 and 8 (500 kHz channels) using DR6 CFList Type Supported 1 Mandatory Data Rate [MinDR:MaxDR] [0:4],[8:13] [0:6],[8:13] Optional Data Rate [MinDR:MaxDR] [5:6] [7] Number of Channels upstream: 64 (125 kHz) + 8 (500 kHz) + 8 (flexibly defined) downstream: 8 (500 kHz) + 72 (flexibly defined) ChMaskCtrl - ChMask 0 -> Channels 0 to 15 1 -> Channels 16 to 31 2 -> Channels 32-47 3 -> Channels 48-63 4 -> Channels 64 to 79 5 -> 10 LSBs controls Channel Blocks 0 to 9, 6 MSBs are RFU 6 -> All 125 kHz ON, ChMask applies to channels 64 to 79 7 -> All 125 kHz OFF, ChMask applies to channels 64 to 79 Default Channels [0:71] Default RX1DRoffset 0 Allowed RX1DRoffset [0:3] [0:5] Duty Cycle No Limit Dwell Time Limitation [0:63] 400ms [64:71] No [0:63] 400ms (regional dependence) [64:71] No TxParamSetupReq Support No Yes Max EIRP (Default) - TXPower 0 +30 dBm Default RX2DataRate DR8 Default RX2 Frequency 923.3 MHz Class B Default Beacon Freq Hops across all 8 downlink channels Class B Default Downlink PingSlot Freq Follows beacon channel Table 3: Fixed channel plan summary 411