Document

RP002-1.0.4 Regional Parameters

Issue link: https://read.uberflip.com/i/1479525

Contents of this Issue

Navigation

Page 95 of 100

LoRaWAN® Regional Parameters RP002-1.0.4 ©2022 LoRa Alliance ® Page 96 of 101 The authors reserve the right to change specifications without notice. 5 Revisions 1949 5.1 Revision RP002-1.0.4 1950 • Added support for the following countries: 1951 o Kazakhstan (IN865) 1952 o Zimbabwe (E868) 1953 • Revised Algeria channel plan support based on latest intelligence from the Regulatory 1954 Working Group, EU868 is supported. 1955 • Added a note to encourage participation in the RPWG by member companies prior to 1956 inventing channel plans. 1957 • Clarified MaxEIRP in AU915 and AS923. 1958 • Created Revision-ID to clearly and concisely enumerate versions of this specification. 1959 • Amended band reference for South Africa to 868-868MHz. 1960 • Bolivia no longer supports AU915, now limited to AS923-1,2,3,4. 1961 • Explicitly allowed single-channel gateways: 1962 o Add channel hopping as an explicit requirement for all regions. 1963 o Remove requirement for network gateways to be listening on all default 1964 channels (EU868, AS923, KR920, RU864). 1965 • Aligned downlink channel selection with the ability to add downlink channels (not 1966 modulo 8, but modulo N) for US915 and AU915. 1967 • Adapted minimum (24 or 72) and maximum (80) channel requirements to [TS001] (all 1968 regions). 1969 • Deprecated CN779. 1970 • Defined PHY parameter LDRO. 1971 • Added global CFList definitions and addition of CFList Type1 for dynamic plan regions. 1972 • Removed support for EU868 from Bonaire, Sint Eustatius, and Saba (not under ETSI 1973 jurisdiction). 1974 • Added support for Relay Specification [TS011]. 1975 • Added a footnote on 915-928 MHz band use for countries in the Australia economic 1976 zone. 1977 • Defined Class B beacon formats for all LoRa Modulation Spreading Factors. 1978 5.2 Revision RP002-1.0.3 1979 • Added AS923-4 to cover 917-920 MHz (Israel). 1980 • Added a clarifying note regarding DR6/DR7 for AS923/IN865. 1981 • Added LR-FHSS clarifications. 1982 5.3 Revision RP002-1.0.2 1983 • Added a summary table of the regional parameter for all regions except for CN470. 1984 • "Repeater Compatible" rationale is described (Section 3) and US902-928, AU915-928 1985 and CN470-520 maximum payload sizes for "repeater compatible" operation were 1986 amended (relaxed) for data rates that do not support encapsulation (this brings them 1987 into harmony with all other regions). 1988 • LR-FHSS data rates added to EU868, US915, AU915. Data rate back-off progression 1989 explicitly documented for all regions. Data rate support requirements clarified for all 1990 regions. 1991 • Aligned the language and descriptions of AS923 maximum payload size section with 1992 that of all the other regions. 1993

Articles in this issue

view archives of Document - RP002-1.0.4 Regional Parameters