Document

TR011-1.0.0 Architecture and Requirements of LoRaWAN Testbed with IPv6 Adaptation for DLMS UA

Issue link: https://read.uberflip.com/i/1488127

Contents of this Issue

Navigation

Page 3 of 11

LoRaWAN® Testbed with IPv6 for DLMS UA TR011-1.0.0 ©2022 LoRa Alliance® Page 4 of 12 The authors reserve the right to change specifications without notice. 1 Conventions The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in IETF Best Current Practice 14 (BCP14 [RFC2119] [RFC8174]) when, and only when, they appear in all capitals, as shown here. Document titles are written as LoRaWAN Link Layer Specification and sections within a document are written as "FPort Assignments". Commands are written PackageVersionReq, bits and bit fields are written PackageIdentifier, constants are written RECEIVE_DELAY1, variables are written N. In this document: ● The octet order for all multi-octet fields SHALL be little endian unless specified differently in the text. ● EUI are 8-octet fields and SHALL be transmitted as little endian. ● By default, RFU bits are Reserved for Future Use and SHALL be set to 0 by the transmitter of the packet and SHALL be silently ignored by the receiver.

Articles in this issue

view archives of Document - TR011-1.0.0 Architecture and Requirements of LoRaWAN Testbed with IPv6 Adaptation for DLMS UA