LoRaWAN
®
Certification Protocol Specification
TS009-1.1.0
©2023 LoRa Alliance
®
Page 14 of 26
The authors reserve the right to change
specifications without notice.
CID Certification Protocol
Command Name
Transmitted
by
Short Description
End-
device
Server
0x44
BeaconCntRstReq x
The DUT SHALL reset the BeaconCnt
value to 0
0x44-0x4F
RFU
0x50
SCHCMsgSendReq x The TCL requests the DUT to send an
uplink SCHC message
0x50
SCHCMsgSendAns x The DUT SHALL convey the answer to
the SCHCMsgSendReq request
0x51
SCHCACKInd x The DUT SHALL send the TCL an
acknowledgement that it has received an
SCHC downlink session
0x52 – 0x7C
RFU
0x7D
TxCwReq x The DUT SHALL set the radio in
continuous wave transmission mode
0x7E
DutFPort224DisableReq x The DUT SHALL disable the processing
of data received on FPort 224
0x7F
DutVersionsReq x The TCL requests the DUT to send its
firmware version, LoRaWAN version, and
regional parameters version
0x7F
DutVersionsAns x The DUT SHALL convey the answer to
the DutVersionsReq request
0x80 - 0xFF
Proprietary x x Reserved for proprietary end-device
command extensions
Table 2: Summary of certification protocol command messages 316
