LoRaWAN
®
Certification Protocol Specification
TS009-1.1.0
©2023 LoRa Alliance
®
Page 9 of 26
The authors reserve the right to change
specifications without notice.
The DUT is required to implement this LoRaWAN Certification Protocol Specification in order 233
to provide a way to control the DUT. The RF-isolated environment mentioned above 234
SHOULD mitigate any potential interference. 235
236
Testing occurs to certify the DUT for each supported activation method, be it OTAA, ABP, or 237
both. 238
239
Between each test section described in specific regional documents, the TCL will return the 240
DUT to a known state. 241
242
The TCL SHALL verify the following throughout the course of this certification test suite: 243
• The DUT uplink frame size SHALL respect the maximum allowed uplink frame size 244
for the data rate currently in use. 245
• The size of the DUT's uplink frames SHALL match the expected content to ensure no 246
extraneous and unnecessary content is present. 247
