Document

TS011-1.0.1 Relay

Issue link: https://read.uberflip.com/i/1527093

Contents of this Issue

Navigation

Page 58 of 61

LoRaWAN ® Relay Specification TS011-1.0.1 ©2024 LoRa Alliance ® Page 59 of 62 The authors reserve the right to change specifications without notice. • The end-device may refrain from sending the forthcoming Class A Uplink, thereby 1841 missing the opportunity to have the uplink potentially received by a gateway. 1842 This type of attack disrupts the traffic of all end-devices served by that relay. 1843 1844 The last consequence is mitigated by having the end-devices send the Class A Uplink 1845 anyway from time to time, even when they have not received the WOR ACK. In the attack 1846 case described here, this mitigation may allow the Class A Uplink to be received by a 1847 gateway. 1848 1849 Recommendations: 1850 • Activate the second WOR channel in the relay if jamming is a concern. 1851 • The end-device should alternate between WOR channels if a WOR ACK is not 1852 received. 1853 • Have the end-device send the Class A Uplink anyway from time to time, even when it 1854 has not received the WOR ACK. This is allowed by this specification (see Section 1855 3.4) and configurable by the NS into each end-device (see Section 10.2). 1856 1857 JAMMING OF THE LORAWAN LINK BETWEEN THE END-DEVICE AND THE RELAY, AT THE RELAY SIDE 1858 Wideband jamming close to the relay will disable its reception. This will prevent it from 1859 serving the end-devices attached to it. The latter are expected to be in small numbers. 1860 1861 A more selective jamming can be mounted by an attacker able to eavesdrop on the WOR 1862 link; it learns the physical parameters of the upcoming LoRaWAN transmission from the 1863 WOR link. 1864 1865 Both attacks are more difficult to mount than jamming the WOR link at the relay side and 1866 provide no additional benefit. 1867 1868 Recommendation: The relay should be able to detect and report severe wideband jamming 1869 to the NS, maybe upon request by the NS. 1870

Articles in this issue

view archives of Document - TS011-1.0.1 Relay