Document

TS011-1.0.1 Relay

Issue link: https://read.uberflip.com/i/1527093

Contents of this Issue

Navigation

Page 60 of 61

LoRaWAN ® Relay Specification TS011-1.0.1 ©2024 LoRa Alliance ® Page 61 of 62 The authors reserve the right to change specifications without notice. APPENDIX 4: NETWORK TIME 1898 SYNCHRONIZATION (INFORMATIVE) 1899 1900 An end-device can send the command DeviceTimeReq to receive the network date and 1901 time from the Network Server. The time provided is the network time captured at the end of 1902 the uplink transmission. 1903 1904 When a relay is added in the loop, the Network Server has to perform some calculations to 1905 find the time of emission of the original uplink. 1906 1907 1908 Figure 18: Network time synchronization 1909 1910 The Network Server is able to compute the time on air of the forwarded message from the 1911 relay: 1912 T2 = T3 – TOA (forwarded uplink) 1913 1914 This specification mandates that the delay between the reception of the uplink from the end- 1915 device and its forwarding by the relay is constant, its value is known as 1916 RELAY_FWD_DELAY. 1917 T1 = T2 - RELAY_FWD_DELAY 1918 1919 The Network Server is now able to send a DeviceTimeAns with a good correction value: 1920 T1 = T3 – TOA (forwarded message) - RELAY_FWD_DELAY 1921 1922 1923 1924 1925 1926 ED Relay GTW T0 T1 T2 T3 T4 T5 T6 T7 Uplink Forwarded Uplink

Articles in this issue

view archives of Document - TS011-1.0.1 Relay