Issue link: https://read.uberflip.com/i/1527095
LoRaWAN ® Certification Protocol Specification TS009-1.2.1 ©2024 LoRa Alliance ® Page 21 of 27 The authors reserve the right to change specifications without notice. 5.14 Class B Beacon Status Indication Control Command 486 (BeaconRxStatusIndCtrl) 487 488 The BeaconRxStatusIndCtrl command requests the DUT to activate/deactivate the 489 BeaconRxStatusInd transmission. 490 491 Size (octets) 1 Field CTRL Table 14: BeaconRxStatusIndReq 492 The CTRL field encodes the BeaconRxStatusInd transmission state. A value of 1 means the 493 transmission is activated and a value of 0 means the transmission is deactivated. 494 495 The TCL can verify the correct operation by checking BeaconRxStatusInd transmission. 496 5.15 Class B Beacon Status Indication Command (BeaconRxStatusInd) 497 498 The BeaconRxStatusInd command is autonomously sent by the DUT every time a beacon 499 is supposed to be received. 500 501 Size (octets) 1 2 3 1 2 1 1 4 7 Fields State RxCnt Frequency DR RSSI SNR Param Time GwSpecific Table 15: BeaconRxStatusInd 502 The State field encodes the beacon acquisition state. A value of 1 means that the beacon 503 acquisition is ON and a value of 0 means that the beacon acquisition is OFF. 504 505 The RxCnt field corresponds to the current BeaconCnt value. 506 507 The Frequency field is a 24-bit unsigned integer. The actual channel frequency in Hz is 508 100 x Frequency, whereby values representing frequencies below 100 MHz are reserved for 509 future use. 510 511 The DR field is the data rate index. 512 513 The RSSI field is a signed 16-bit value expressed in dBm of the received beacon signal 514 strength. 515 516 The SNR field is a signed 8-bit value expressed in dB of the received beacon signal to noise 517 ratio. 518 519 The Param field follows the same rules as the ones provided by [TS001]. 520 521 The Time field follows the same rules as the ones provided by [TS001]. 522 523 The GwSpecific field follows the same rules as the ones provided by the [TS001]. 524