Issue link: https://read.uberflip.com/i/1527095
LoRaWAN ® Certification Protocol Specification TS009-1.2.1 ©2024 LoRa Alliance ® Page 23 of 27 The authors reserve the right to change specifications without notice. Table 18: SCHCACKInd 559 5.19 Fragmentation Session Counter Commands (FragSessionCntReq, 560 FragSessionCntAns) 561 562 This command is related to the Fragmentation Data Block Transport (TS004) specification. 563 564 The FragSessionCntReq command requests the DUT to provide the SessionCntPrev 565 value for the FragIndex requested. 566 567 Size (octets) 1 Field Param Table 19: FragSessionCntReq 568 Where: 569 Bits 7:2 1:0 Param bits RFU FragIndex Table 20: FragSessionCntReq Param bits 570 571 572 The DUT answers the FragSessionCntReq command with a FragSessionCntAns 573 command. 574 575 Size (octets) 1 2 Field Status SessionCntPrev (conditional) Table 21: FragSessionCntAns 576 577 Where: 578 Bits 7:3 2 1:0 Status bits RFU Session is not supported FragIndex Table 22: FragSessionCntAns Status bits 579 The SessionCntPrev field SHALL be present only when Session is not supported 580 bit is set to 0. 581 5.20 Relay Mode Control Command (RelayModeCtrl) 582 583 This command is related to the Relay (TS011) specification. 584 585 The RelayModeCtrl command requests the DUT to activate/deactivate the Relay mode of 586 operation. 587 588 Size (octets) 1 Field CTRL Table 23: RelayModeCtrl 589 The CTRL field encodes the relay new mode of operation. A value of 1 means that the relay 590 mode shall be activated and a value of 0 means that the relay mode shall be deactivated. 591