Issue link: https://read.uberflip.com/i/1527095
LoRaWAN ® Certification Protocol Specification TS009-1.2.1 ©2024 LoRa Alliance ® Page 14 of 27 The authors reserve the right to change specifications without notice. CID Certification Protocol Command Name Transmitted by Short Description End- device Server 0x44 BeaconCntRstReq x The DUT SHALL reset the BeaconCnt value to 0 0x44-0x4F RFU 0x50 SCHCMsgSendReq x The TCL requests the DUT to send an uplink SCHC message 0x50 SCHCMsgSendAns x The DUT SHALL convey the answer to the SCHCMsgSendReq request 0x51 SCHCACKInd x The DUT SHALL send the TCL an acknowledgement that it has received an SCHC downlink session 0x52 FragSessionCntReq x The TCL requests the DUT to provide the SessionCntPrev value for the FragIndex requested 0x52 FragSessionCntAns x The DUT SHALL convey the answer to the FragSessionCntReq request 0x53 RelayModeCtrl x The TCL requests the end-device to activate/deactivate the Relay mode of operation 0x54 – 0x7C RFU 0x7D TxCwReq x The DUT SHALL set the radio in continuous wave transmission mode 0x7E DutFPort224DisableReq x The DUT SHALL disable the processing of data received on FPort 224 0x7F DutVersionsReq x The TCL requests the DUT to send its firmware version, LoRaWAN version, and regional parameters version 0x7F DutVersionsAns x The DUT SHALL convey the answer to the DutVersionsReq request 0x80 - 0xFF Proprietary x x Reserved for proprietary end-device command extensions Table 2: Summary of certification protocol command messages 320