LoRaWAN
®
Certification Protocol Specification
TS009-1.2.1
©2024 LoRa Alliance
®
Page 9 of 27
The authors reserve the right to change
specifications without notice.
The DUT is required to implement this LoRaWAN Certification Protocol Specification in order 237
to provide a way to control the DUT. The RF-isolated environment mentioned above 238
SHOULD mitigate any potential interference. 239
240
Testing occurs to certify the DUT for each supported activation method, be it OTAA, ABP, or 241
both. 242
243
Between each test section described in specific regional documents, the TCL will return the 244
DUT to a known state. 245
246
The TCL SHALL verify the following throughout the course of this certification test suite: 247
• The DUT uplink frame size SHALL respect the maximum allowed uplink frame size 248
for the data rate currently in use. 249
• The size of the DUT's uplink frames SHALL match the expected content to ensure no 250
extraneous and unnecessary content is present. 251
