Radio Equipment Directive Security FAQ
4. What does the term "internet-connected radio equipment" mean in the context of
LoRaWAN?
A LoRaWAN gateway typically has a LoRa concentrator and communicates with a
LoRaWAN Network Server (LNS) using the internet, so will always be classified as
"internet-connected radio equipment". However, there is some debate as to whether a
LoRaWAN end-device should be classified as "internet-connected radio equipment".
Consider a LoRaWAN end-device that uses only a LoRa radio and a LoRaWAN stack using
the LoRaWAN protocol to communicate with a LoRaWAN Network Server (LNS) via a
LoRaWAN gateway, i.e. it has no other network interface.
In many cases, such a LoRaWAN end-device does not contain an internet protocol (IP)
stack or an IP address, therefore is unlikely to be classified as "internet-connected radio
equipment".
In some cases, such a LoRaWAN end-device does contain an internet protocol (IP) stack
and IP address (for example, if it uses the SCHC adaptation layer). In these cases, it is
likely that a LoRaWAN end-device would be classified as "internet-connected radio
equipment".
Orgalim have produced position paper that provides an interpretation of "internet-connected
radio equipment", along with some representative examples. There is also a report by a
group of smart meter stakeholders that applies to smart meter products that includes an
example of a LoRaWAN end-device. Both these papers can be used to assist LoRaWAN
end-device manufacturers in the classification of their product as "internet-connected radio
equipment".
5. If a LoRaWAN end-device is in the scope of the RED Delegated Regulation, what needs to
be done to ensure compliance?
The EN 18031 harmonized standards (EN18031-1:2024, EN18031-2 2024 and EN18031-
3:2024) developed by CEN and CENELEC in support of the Commission Delegated
Regulation 2022/30/EU are cited in the Official Journal of the European Union (OJEU).
Therefore, compliance with these harmonized standards confers Presumption of Conformity
with the essential requirements set out in the RED Articles 3.3(d), 3.3(e) and 3.3(f), taking
into account the restrictions introduced in the Commission Implementing Decision (EU)
2025/138.
Furthermore, there are many organizations who can assist LoRaWAN end-device
manufacturers through the use of the EN 18031 harmonized standards to ensure their
products conform.