Guides & Toolkits

2 330-CGM-01-IMDO © 2026, Workplace Safety & Prevention Services (WSPS) 1 877 494 WSPS (9777) | 905 614 1400 | WSPS.CA © Workplace Safety & Prevention Services 2026. Workplace Safety & Prevention Services (WSPS) grants permission to approved end users to reproduce this document in whole or in part, provided its intended use is for non-commercial, educational purposes and that full acknowledgement is given to the WSPS. Approved end users are firms registered with the Workplace Safety and Insurance Board. WSPS reserves the right to extend this permission to other stakeholders and interested parties by express written permission upon application. WSPS extends no warranty to materials amended or altered by the end user. Under no circumstances is this document, or any portion thereof, to be duplicated for purposes of sale or for external reproduction or distribution. (Sample WSPS acknowledgement, "Reproduced or adapted from name of solution with permission of Workplace Safety & Prevention Services, Mississauga, Ontario.") The information contained in this reference material is distributed as a guide only. It is generally current to the best of our knowledge as at the revision date, having been compiled from sources believed to be reliable and to represent the best current opinion on the subject. No warranty, guarantee, or representation is made by WSPS as to the absolute correctness or sufficiency of any representation contained in this reference material. WSPS assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this reference material, or that other or additional measures may not be required in particular or exceptional conditions or circumstances. Published: June 2026 Space reserved for a QR code or link to location‑specific policies and programs Space reserved for a QR code or link to the specific equipment manual for the site TO FURTHER PROTECT OPERATORS: 1. A risk assessment should be completed for every project to determine what safety measures are required. 2. Mag switch should be in place to prevent unintended restart after power loss. (Sec. 25 (2)(h) OHSA) 3. Reviewing the manufacturer's manual is recommended to identify safe operating measures as well as preventative maintenance requirements. (Sec. 25 (1)(b) and 25 (2)(a) OHSA) 4. Ensure safe work procedures (including lockout) are in place, operators are trained and supervised to ensure procedures are followed. (Sec. 25 (2)(a) and (d) OHSA and Sec. 76, Reg 851) 5. Appropriate PPE should be worn while using the equipment. (Sec. 25 (1)(b.1) OHSA) 6. For additional information, use QR codes on the reverse to access the manufacturer's manual and safety policy or procedure. F Combination sanders can be unstable if not positioned/mounted properly. Ensure the machine is secured to the floor/tabletop to prevent tipping. Portable combination sanders should have a proper stand or mobile base set on a level surface. Sec. 25 (1)(d) OHSA Sec. 25 (2)(a) OHSA Sec. 46, Reg. 851 G Sanding produces fine dust which is an inhalation hazard. Ensure dust port is connected to a suitable dust collection system. Sec. 25 (1)(a),(d) OHSA Sec. 25 (2)(h), OHSA Sec. 126, 127, Reg. 851 H Damaged electrical connections or components can create a risk of shock or inhibit safe operation. Regularly inspect the electrical connections and plug to confirm they are free from damage. Sec. 25 (1)(b) OHSA

• Cover