PRE OPERATION
1. Prepare the workspace: clear the table and surrounding floor except for the workpiece.
2. Ensure grinder is properly secured: verify the grinder is firmly bolted to a bench, workstation or
pedestal so it cannot shift during use, inspect hardware to ensure its tight and in good condition.
3. Inspect wheel: inspect the wheel for chips, cracks or visible damage. Do not use a damaged wheel.
4. Adjust tongue/spark guard: adjust the tongue guard to have maximum 6mm (ΒΌ") clearance from
wheel.
5. Adjust tool rest: adjust tool rest to have maximum 3mm (1/8") clearance from wheel and be
positioned above the grinding wheel's center line. Ensure tool rest is securely fastened after every
adjustment. Never adjust the tool rest while wheel is moving.
6. Set eye shield: position the shield over the point of operation.
REQUIRED PPE
Safety Glasses Hearing Protection Face Shield Non-slip approved
CSA footwear
Always wear all required PPE
PRECAUTIONS
1. Inspect equipment - Do not use if equipment is damaged.
2. Inspect guards/shields - Do not use if guards/shields are missing or damaged.
3. Inspect grinding wheel for visible damage or cracks - Do not use if damaged.
Damaged wheels can explode apart.
4. Secure long hair, ensure no loose clothing, remove jewelry, no gloves while
machine is in operation.
HAZARDS
Cuts
Entanglement
Dust
Burns
Noise
Pinch point
Flying debris
Kickback
Report any issues or findings to your supervisor immediately
!
Only use equipment if you are trained and authorised to do so.
Refer to user manual for additional information including set up, maintenance and instructions for use.
WSPS.CA
GRINDER SAFE WORK PROCEDURE
