Issue link: https://read.uberflip.com/i/401143
Ulti-Mate Connector Inc. • Ph. 714.637.7099 • Fx. 714.637.7464 • www.UltimateConnector.com NANO D NANO-D SERIES PERFORMANCE DATA MATERIALS AND FINISHES 123-M10 MECHANICAL CONTACT ENGAGING FORCE: 5 oz max. (Contact average is 2 oz.) CONTACT SEPARATING FORCE: 0.4 oz. min. CONNECTOR MATING FORCE: 7 oz. x number of contacts max. CONNECTOR UNMATING FORCE: 7 oz. x number of contacts max. VIBRATION: No damage or interruption detected (one microsecond sensitivity) EIA-364-28 Condition IV SHOCK: No damage or interruption detected (one microsecond sensitivity) EIA-364-28 Condition IV DURABILITY: No mechanical or electrical defects after 500 matings. SALT SPRAY: No exposure of base metal or loss of performance after 96 hours for both Nickel and Cadmium plating 123-E 10 ELECTRICAL CONTACT RESISTANCE: .080 mΩ max.@ 1.0 A CURRENT RATING (SIGNAL CONTACTS): 1.0 A max. DIELECTRIC WITHSTANDING VOLTAGE: 250 VAC at sea level , 100 VAC at 70,000 ft. INSULATION RESISTANCE: 5,000 MΩ min.. 123-M&F MATERIALS AND FINISHES Pin Contacts Pins: BeCu alloy strip per ASTM–B–194 Socket Contacts Sockets: BeCu per ASTM–B–194 Contact Plating Gold plate per ASTM B488, or SAE AMS 2422 Metal Shells Aluminum alloy per SAE-AMS-QQ-A-200/8, Type 6061-T6, with electroless nickel SAE AMS2404, class 3 or 4 or electrodeposited cadmium plating per SAE-AMS-QQ-P-416, Type II, class 3, with Yellow Chromate or Anodize per Mil-A-8625, Type III, Class 2, Black, Stainless Steel per ASTM A582, Titanium Alloy per MIL–T–81556, Unplated Molded Insulators into Metal housing Insulating compound per MIL–I–16923. Liquid Crystal Polymer (LCP), per MIL–M–24519 GLCP–30F, 30% Glass Hardware Corrosion resistant steel per ASTM A 582/A582 or ASTM A 581/ A581M, Passivated per SAE AMS–2700 126-M&F MATERIALS AND FINISHES Pin Contacts Pins: BeCu alloy strip per ASTM–B–194 Socket Contacts Sockets: BeCu per ASTM–B–194 Contact Plating Gold plate per ASTM B488, or SAE AMS 2422 Molded Full plastic housing: Insulating compound per MIL–I–16923. Liquid Crystal Polymer (LCP), per MIL–M–24519 GLCP–30F, 30% Glass Hardware Corrosion resistant steel per ASTM A 582/A582 or ASTM A 581/ A581M, Passivated per SAE AMS–2700 WIRED SINGLE ROW-SINGLE ENDED-METAL SHELL ............................................................................................................................................................ 34 SINGLE ROW-DOUBLE ENDED-METAL SHELL ........................................................................................................................................................... 36 DUAL ROW-SINGLE ENDED-METAL SHELL ............................................................................................................................................................... 38 DUAL ROW-SINGLE ENDED-PLASTIC SHELL ............................................................................................................................................................. 40 DUAL ROW-DOUBLE ENDED-METAL SHELL .............................................................................................................................................................. 42 DUAL ROW-DOUBLE ENDED-PLASTIC SHELL ............................................................................................................................................................ 44 26