Issue link: https://read.uberflip.com/i/401143
Ulti-Mate Connector Inc. • Ph. 714.637.7099 • Fx. 714.637.7464 • www.UltimateConnector.com 123-M10 MECHANICAL CONTACT ENGAGING FORCE: 5 oz max. (Contact average is 2 oz.) CONTACT SEPARATING FORCE: 0.4 oz. min. CONNECTOR MATING FORCE: 7 oz. x number of contacts max. CONNECTOR UNMATING FORCE: 7 oz. x number of contacts max. VIBRATION: No damage or interruption detected (one microsecond sensitivity) EIA-364-28 Condition IV SHOCK: No damage or interruption detected (one microsecond sensitivity) EIA-364-28 Condition IV DURABILITY: No mechanical or electrical defects after 500 matings. SALT SPRAY: No exposure of base metal or loss of performance after 96 hours for both Nickel and Cadmium plating 133-E 1 ELECTRICAL CONTACT RESISTANCE: 0.033 mΩ max.@ 1.0 A CURRENT RATING (SIGNAL CONTACTS): 1.0 A max. DIELECTRIC WITHSTANDING VOLTAGE: 250 VAC at sea level , 100 VAC at 70,000 ft. INSULATION RESISTANCE: 5,000 MΩ min. FIELD ATTACHABLE DUAL ROW-METAL SHELL .................................................................................................................................................................................. 134 DUAL ROW-PLASTIC SHELL................................................................................................................................................................................ 136 CIRCULAR INLINE-PLASTIC SHELL ....................................................................................................................................................................... 138 126-M&F MATERIALS AND FINISHES Pin Contacts Pins: BeCu alloy strip per ASTM–B–194 Socket Contacts Sockets: BeCu per ASTM–B–194 Contact Plating Gold plate per ASTM B488, or SAE AMS 2422 Molded Full plastic housing: Insulating compound per MIL–I–16923. Liquid Crystal Polymer (LCP), per MIL–M–24519 GLCP–30F, 30% Glass Hardware Corrosion resistant steel per ASTM A 582/A582 or ASTM A 581/A581M, Passivated per SAE AMS–2700 NANO D NANO-D SERIES PERFORMANCE DATA MATERIALS AND FINISHES 32