Issue link: https://read.uberflip.com/i/559169
131 Circular Industrial Connectors are packaged and sold in modules so that users may select the exact components to suit their requirements. To properly select those components, the following questions must be answered: 1) What is the wire size to be connected? 2) How many wires are there to connect? 3) What is the voltage requirement? 4) If a cable is involved, what is the cable diameter? 5) If a conduit is involved, what type of conduit and trade size? 6) For stationary receptacles, what mounting arrangement is required? 7) Are any accessories or special application considerations involved? With above information it is possible to rapidly specify the Industrial Interfaces Connector configuration exactly suited to your needs. There are few things to keep in mind when specifying and ordering the modular components comprising Industrial Interfaces Connectors. 1) The inserts are capable of accepting different types and sizes of terminals. To give users maximum flexibility, the terminals are ordered separately for the Spectre Connectors. See the information in the insert selection guide and the terminal selection guide in the specification section. 2) Except for the Direct Flange Mount Front Shells, a back shell is always required to complete a connector half. 3) Angle adapters are available. 4) We are system problem solvers! If you do not see the solution to your problem in the catalog, give us a call. We would be delighted to work with you. Our products exist because of your needs. 5) Unlike most connector vendors, we deliver PROMPTLY. Delivery is designed into our products and supported by an in-depth inventory stock policy monitored by MRP computer software. We do appreciate knowing your requirements early and will gladly deliver your shipment to your JIT delivery date. Circular Industrial ™ Connectors Overview Modular Design for Maximum Flexibility Having determined the insert and terminal requirements: 1) Select the catalog number from the proper front shell page that describes the shell and insert type required. 2) Select the catalog number from the proper back shell page that describes the size and type required. 3) Repeat these steps for the other side of the connector. 4) Select dust caps as required. 5) From the terminal selection guide, select the appropriate terminals for front shells that are sold without terminals. 6) Select the necessary insertion and removal tools and the proper crimp tools and locators from the tool selection guide. CATALOG NUMBER SELECTION Molex Industrial Division New England Operations Gilford, NH Phone (603) 524-5101 Fax (603) 524-1627 Ulti-Mate Connector Inc. 1872 North Case Street Orange, Ca 92865 www.umi-c.com T : 714-637-7099 F : 714-637-7464 1