Issue link: https://read.uberflip.com/i/559169
158 Selection Chart MIL Connector Designation Thread Size 5015-C 5015-SE 5015-A-A 5015-A-E 5015-B 5015-C-A 5015-C-E 26482-1A 26482-1B 26482-2 38999-1 38999-2 83723-1 83723-2 5/8- 24 UNEF 10, 10S, 10SL 10SL, 12, 12S 10SL 10SL 10SL, 12, 12S 12, 12S 8 10, 10S, 10SL 10, 10S, 10SL 12, 12S 11/16- 24 UNEF 12, 12S 12, 12S 12, 12S 12 13 12 3/4- 20 UNEF 12, 12S 14, 14S 14, 14S 14, 14S 14, 14S 14, 14S 14, 14S 10 12, 12S 12, 12S 14, 14S 13/16- 20 UNEF 14 15 14 7/8- 20 UNEF 14, 14S 16, 16S 16, 16S 16, 16S 16, 16S 16,16S 16, 16S 12 14, 14S 16, 16S 15/16- 20 UNEF 16 17 16 1- 20 UNEF 16, 16S 18 18 18 18 18 18 14 16, 16S 16, 16S 18 1-1/16- 18 UNEF 18 18 18 19 18 18 1-1/8- 18 UNEF 20 20 20 20 16 20 1-3/16- 18 UNEF 20 20, 22 20 20 21 20 20 1-1/4- 18 UNEF 22 22 22 22 22 18 22 1-5/16- 18 UNEF 22 22 22 23 22 22 1-3/8- 18 UNEF 24 24 24 24 24 20 24 1-7/16- 18 UNEF 24 24, 28 24 24 25 24 24 1-1/2- 18 UNEF 22 1-5/8- 18 UNEF 28 28 28 28 28 24 28 1-3/4- 18 UNS 28 32 28 Thread Size 5015-C 5015-SE 5015-A-A 5015-A-E 5015-B 5015-C-A 5015-C-E 26482-1A 26482-1B 26482-2 38999-1 38999-2 83723-1 83723-2 1- 20 UNEF 16, 16S 18 18 18 18 18 18 14 16, 16S 16, 16S 18 1-1/16- 18 UNEF 18 18 18 19 18 18 1-1/8- 18 UNEF 20 20 20 20 16 20 1-3/16- 18 UNEF 20 20, 22 20 20 21 20 20 1-1/4- 18 UNEF 22 22 22 22 22 18 22 1-5/16- 18 UNEF 22 22 22 23 22 22 1-3/8- 18 UNEF 24 24 24 24 24 20 24 1-7/16- 18 UNEF 24 24, 28 24 24 25 24 24 1-1/2- 18 UNEF 22 1-5/8- 18 UNEF 28 28 28 28 28 24 28 1-3/4- 18 UNS 28 32 28 All reference shell designations are for preliminary reference only. To insure thread conformance, always measure thread of front shell whenever possible. The many variation differences between manufacturers and the multitude of backshell adapters or endbells involved, especially on 5015 commercial types, The order numbers above indicate a Nickel plating system rated at a 200 hour salt spray Last Digit Description Salt Spray Rating (Hours) 0 Raw Brass 2 Olive Drab Cadmium over Nickel 500 3 Electroless Nickel 500 4 Nickel 200 6 Olive Drab over Zinc 48 may not always be reflected in these summary charts. Consult factory if you are in doubt as to the proper backshell to use. Note: See selection chart definition on following page. Molex Industrial Division New England Operations Gilford, NH Phone (603) 524-5101 Fax (603) 524-1627 Ulti-Mate Connector Inc. 1872 North Case Street Orange, Ca 92865 www.umi-c.com T : 714-637-7099 F : 714-637-7464 28