AGAM Technical Catalog

Agam Technical Catalog

AGAM Technical Catalog Online Edition

Issue link: https://read.uberflip.com/i/673084

Contents of this Issue

Navigation

Page 218 of 453

1081 mm (42⁹⁄₁₆") 1081 mm (42⁹⁄₁₆") 1150 mm (45¹⁄₄") 2311 mm (91") 2181 mm (85⁷⁄₈") 2286 mm (90") B G D F I A C E H Doors / Sliding // 6695 Business Parkway Elkridge, MD 21075 USA 1.410.796.6400 tel 1.800.645.0854 tel 1.410.796.0589 fax 1.800.348.2426 fax www.agam.com info@agam.com C8.5 © Copyright 1998-2019 Agam Group, Ltd. All Rights Reserved, ATC-V09-C8-ENG (2019.01) Door Lock for Sliding Door (x1) (Reference 860 11) Pre-installed into vertical PH1070. Comes with 1 key. Track Stop (x2) (Reference 860 301 01) Attaches to MR1200 track. Comes with DIN916 M5x10 screws. Door Frame (x1) (References 103A, 103B) Uses PH1070 and PH1003B. Pieces are cut to length and punched for Miter Connector (Reference 290 42 F30). Length and width of door can be adjusted to specifications. Track Hanger (x4) (Reference 860 302 01 or 860 303 01) Attaches track to outer framework. Comes with DIN916 M5x10 screws. Two size options available for varying framework sizes (PH1002 shown). Sliding Door, Contemporary Reference: 860 01 Details: Door rolls on track mounted in front of partition frame Shipping: Door is shipped K.D. in cardboard box Hex Keys: 2.5 mm, 3 mm, 4 mm, 5 mm (included) Weight: 32 lbs B Door Hanger Assembly (x2) Each contains the following: • (1) Door Hanger Plate, ref. 860 101 • (1) Door Hanger Block, PH2715 ref. 860 102 • (1) Spacer for Roller, ref. 860 103 • (1) Roller, ref. 822 21 • (3) Standoff 2525 • (4) Standoff Cap 25 • (2) DIN916 M6 x 25 set screws Floor Guide (x1) (Reference 822 26) Made from a modified PS5 connector. Comes with a DIN916 M5x6 screw. MR End Cap, Threaded (x2) (Reference 370 180 THREAD) Install into plastic inserts inside the track. Straight Orientation A D C H I G F E Includes two pre-installed Square Plastic Insert pieces to accept end caps. MR1200 Track (x1) (Reference 181) Door Handle Assembly (x1) Components include: • (2) Door Handle Plate, ref. 860 201 • (4) Standoff 2525 • (4) Standoff Cap 25 • (2) DIN916 M6 x 30 set screws Curved Orientation Length can be adjusted to specifications.

Articles in this issue

Links on this page

Archives of this issue

view archives of AGAM Technical Catalog - Agam Technical Catalog