Issue link: http://read.uberflip.com/i/1014206
14 ph. 888-778-3312 www.spdexhaust.com Overall Length MC vs WMC 25 degree 2.00" w/ 3.00" outlet Weld-On Merge Installa on Weld-On Merge Collectors (WMC) WMC's start life as a Merge Collector with a specific centerline spacing. The bends used are one tube size larger than the primary tubes on your applica on, allowing them to seat just inside the collector (about .18" - .25" deep). A er assembly, the straight sec on is removed as well as the center pyramid. • A hose clamp can be used to constrain the tubes. • "Slip-on" & "Turbo Style" collectors will need shims to maintain centerline spacing of tubes. Check collector fit at each step. Square header primary tubes • Fully weld star and bu ed tube ends. • Con nue the weld 3/8" - 1/2" down the valley between each pair of tubes • Test fit collector and add addi onal beads of weld to minimize gaps between valley and collector. Weld star and valley A Shorter Length is the biggest advantage of a Weld-On Merge Collector. Compared to a standard Merge Collector (see example right) the WMC is much shorter, making it easier to package in the confined space of the typical turbo charged vehicle. Customized - Unlike stamped / formed collectors that have to be retooled to change their shape, WMC's can be custom tailored to fit your design parameters with different convergent angles, outlet sizes, and inlet centerlines. Material - When ordering WMC's you can chose from three different material types: 1008 Mild Steel, 304 stainless or 321 stainless steel. Welded Collector (Unfinished) Finished Part Tack star into center of tubes • Tack a few spots and test fit the collector. • Make sure the collector fits correctly. • It it fits well, remove the collector and do the finish welding.

