SPD 2018 Catalog

2018 Catalog

Issue link: http://read.uberflip.com/i/1014206

Contents of this Issue

Navigation

Page 16 of 91

15 fax 916-635-2970 info@spdexhaust.com Formed Collectors Next Page WMC25200-216T Shown with: Hand-formed outlet T4 turbo flange Weld Fee WMC25150 3 30416S Weld-On Merge Installa on (con nued) Turbo Style WMC's are built with a slightly wider centerline. This leaves a gap between each of the header pipes allowing for expansion. Use shims to maintain this spacing when welding the collected header tubes together. Street Style WMC's are designed for header tubes that are collected together with a net fit (no clearance). This makes them easy to assemble. SWMC (Slip-On Weld-On Merge Collectors) We now offer WMC's with swedged slip- over tubes on the inlet. These collectors allow for the largest possible outlet sizes on our shortest collectors. Available for primary tube sizes up to 2.75" Swedged Tube Extensions added (Tube Extensions - see page. 29) SFC - Slip-on Formed Collector Swedged Tube Extensions added (Tube Extensions - see page. 29) FC_C - Rolled Cone Collector Made from rolled & seam welded sheet metal. FC - Formed Collector Made from straight tubing. Weld-On Merge Collectors (WMC) • Square collector on primary tubes. • Tack collector at mul ple points to maintain posi on while welding. • Weld en re circumference of collector to header primaries. • Use a flashlight if necessary to check for leaks. Fit and weld collector Add bullet vanes (optional) • Vanes removed from merge are included with WMC (4, 5 & 6 -1 only) + + CL + + CL

Articles in this issue

Links on this page

view archives of SPD 2018 Catalog - 2018 Catalog