Issue link: https://read.uberflip.com/i/1479525
LoRaWAN® Regional Parameters RP002-1.0.4 ©2022 LoRa Alliance ® Page 97 of 101 The authors reserve the right to change specifications without notice. • Added language to all regions to align with new applications of NewChannelReq 1994 commands as of [TS001-1.1+]. 1995 • Amended RU864-870 to indicate that 16 channels SHALL be supported. This was 1996 believed to have been an editorial oversight. 1997 • Added Senegal (EU868), Montserrat (AU915), Mali (EU433), Guinea (EU433), 1998 Senegal (EU868), Syria (EU433, EU868, AS923-3), and Vanuatu (IN865 & AS923-3) 1999 to cross-reference table. 2000 • Modified Israel and Morocco cross-reference table entries. 2001 • Added a Channel Index ID to the Channel Plan Common Name Table. 2002 • Added AS923-1,-2,-3 to the Channel Plan Common Name Table. 2003 • Defined CLASS_B_RESP_TIMEOUT and CLASS_C_RESP_TIMEOUT (used in 2004 [TS001-1.0.4] and later). 2005 5.4 Revision RP002-1.0.1 2006 • Modified AS923 to support multiple groups of default/join channels. Each country/band 2007 supports a specific configuration based on an offset from the original AS923 2008 default/join channels. Country summary table updated to indicate support. 2009 • Defined Cuba, Indonesia, Philippines, and Vietnam channel plan use. 2010 • Israel support for EU433 and AS923-3 was backed out as Israel MoC has deprecated 2011 their use for LoRaWAN as of November 2019. A new 900 MHz band is under 2012 discussion with the MoC. 2013 • Increased MaxPayload size for AS923, Data Rate 2 from 59 to 123 for 2014 UplinkDwellTime = 0 and DownlinkDwellTime = 0. 2015 • Modified CN470-510 to reflect most recent regulatory requirements. Specifically, SF12 2016 is no longer available and maximum payload sizes for several other data rates were 2017 modified to comply with the 1 second dwell time. Further, a 500 kHz LoRa data rate 2018 and an FSK data rate were added. 2019 • For dynamic channel plan regions, clarified that it is only by default that the RX1 2020 frequency is the same as the uplink frequency. 2021 5.5 Revision RP002-1.0.0 2022 • Initial RP002-1.0.0 revision, the regional parameters were extracted from the released 2023 LoRaWAN v1.1 Regional Parameters. 2024 • Added statement in Section 1 regarding non-authoritative source for regional 2025 regulatory information. 2026 • Added Section 2.2 RegParamsRevision common names table. 2027 • Added Regulatory Type Approval to quick reference table in Section 1. 2028 • Added Section 3 (changing this section to section 4) to incorporate changes from CR 2029 00010.001.CR_add_physical_layer_description_Kerlink.docx of the TC21 meeting. 2030 • Clarified Physical Header Explicit Mode (section 3.1). 2031 • Required end-devices in AS923 to accept MaxPayload size downlinks as defined for 2032 DownlinkDwellTime=0, regardless of its actual configuration. 2033 • Fixed several MaxPayload tables when operating in "repeater compatible" mode, no 2034 MACPayload (M) may be larger than 230 bytes, regardless of dwell-time limitations. 2035 • Updated and clarified section 3, Physical Layer. 2036 • Normative language cleanup. 2037 • Removed Beacon format definition and referred back to LoRaWAN specification. 2038 • Fixed the footnote for the US plan in section 2.5.3. 2039 • Added notes concerning the use of ARIB STD-T108 for AS923 end-devices in section 2040 2.10.2. 2041