WHITE PAPER
Achieving Full-Spectrum Dominance
mrcy.com 6
ARES can incorporate targets of interest into the high-fidelity
ground return and configure various phenomena such as
environmental effects, electronic countermeasures, layover,
spurs, resolution, and registration. This allows developers to
test various air-to-air and air-to-ground radar modes such as
ATR, spotlight SAR, and ground moving target (GMT) modes in a
controlled lab environment.
ARES's software interface gives developers immediate access
to test data that can be quickly analyzed, allowing them to
continue testing and retesting without scheduling, flying, and
gathering data in the field. With the graphical user interface
(GUI), the user can set up any desired geometry and add targets
of interest to the scene being imaged. This allows users to test
target identification, weapons targeting, and battle damage
assessment features.
ARES features
▪ Realistic flight emulation: ARES emulates real-world flight
scenarios, including ground targets, adversarial threats, terrain,
and SAR imagery in a lab, anechoic chamber, or open range.
▪ Adversarial threats simulation: The DRFM-based simulation
option emulates validated, near-peer, ground, and air
electronic attack threats.
▪ 360-degree visuals: Optional direct-inject capability delivers
360 degrees of emulation without antennas.
▪ Built-in-test (BIT) and autocalibration: ARES calibrates to
any test environment and identifies hardware malfunctions.
▪ Instantaneous data for analysis: The software interface
displays data in real time and has customizable data-logging
rates and data parameters to streamline data analysis and
reduce file size.
▪ Automatic data sanitization: ARES stores all data on
removable hard drives and automatically sanitizes
nonvolatile memory during system power down, which
simplifies the handling of sensitive data and prevents data
sharing if ARES has multiple users.
SAR MODE TESTING WITH ARES IN AN
ANECHOIC CHAMBER
Operationally, the ARES-SAR system is designed to interact
with the system under test (SUT) in a free space environment
or through direct injection of a signal from the SUT's sum
por t to the ARES-SAR system's RF input. In a free space
setting, such as an anechoic chamber, the plane is located
at one end of the chamber and transmitting a signal as if the
vehicle were in flight. There are no connections between the
vehicle's radar and the ARES-SAR system. The ARES-SAR
system's RF input receives the transmitted signal through a
connection to a horn in the chamber. The system inter faces
with the facility to receive avionics control signals (navigation
data), iner tial navigation system (INS) data, inter-range
instrumentation group (IRIG) time code reference clocks, and
other synchronization signals. Figure 2.2 shows an HH-60W
undergoing testing in an anechoic chamber.
Figure 2.2: An HH-60W undergoing testing in a chamber.
Figure 2.1 Mercur y 's ARES subsystem can emulate real-world
flight scenarios.