Fleet Management News & Business Info | Commercial Carrier Journal
Issue link: http://read.uberflip.com/i/117975
products new Trailer side skirt Utility Trailer���s aerodynamic Side Skirt 120A-4 is verified by the U.S. Environmental Protection Agency���s SmartWay program to achieve greater than 5 percent fuel savings and can be used in combination with low rolling-resistance tires on Utility trailers to achieve California Air Resources Board compliance. The skirt is engineered to achieve greater ground clearance to reduce impact damage; its galvanized hightensile steel bracing system allows the side skirt to flex both inward and outward, and to be bent back if damaged. Utility Trailer Manufacturing Co., www.utilitytrailer.com, 626-965-1541, Text INFO to 205-2893554 or visit www.ccjdigital.com/info Terminal cleaner set IPA���s three-piece Plow Electrical Connector Terminal Cleaner Set (No. 8045) is designed to remove corrosion and extend the harness life of male and female electrical connections while reconditioning electrical connections. The set ��� which comes in a hard-wearing leather-type holster with a magnetic clasp ��� is made to remove corrosion from common round pin (male and female) electrohydraulic grill-mounted plow connectors. IPA Tools, www.ipatools.com, 845-679-4500, Text INFO to 205-289-3554 or visit www.ccjdigital.com/info Coolant hose Black topcoat Gates��� FleetRunner Hi-Temp Straight Coolant Hose for heavy-duty applications ��� including trucks, buses and off-road equipment ��� is designed to accommodate the higher temperatures of today���s low emissions-compliant engines. The hose is built with a tube and cover constructed with peroxide-cured EPDM and has a temperature rating of -40 to 300 degrees Fahrenheit. The abrasion-resistant material is designed to offer a high working pressure, resist electrochemical degradation, bind to system components for fewer cold water leaks and offer a lower water permeation rate than silicone hose. PPG���s ALK28-901 fast-drying black topcoat is suitable for trailers, metal fabrications, castings, cabinets, machinery and heavy equipment. It can be applied directly to metal, on select substrates or over approved primers, and its fast-dry characteristics and good water spot resistance can help increase production throughput. The topcoat requires just one or two coats and can be applied using conventional, HVLP, airless or air-assisted spray equipment with or without reduction. Gates Corp., www.gates.com, 303-744-4393, Text INFO to 205-289-3554 or visit www.ccjdigital.com/info PPG Commercial Coatings, www.ppgcommercialcoatings.com, 800-647-6050, Text INFO to 205289-3554 or visit www.ccjdigital.com/info commercial carrier journal | april 2013 CCJ_0413_PRODUCTS.indd 81 81 3/20/13 9:39 AM