Issue link: http://read.uberflip.com/i/536739
STARRINKS.COM JULY.AUGUST.2015 / 45 sources including resurfacers, heaters/ dehumidifiers and even from outside vehicles running near an air vent. Every rink should have air quality testing equipment. Equipment should be easy to use in not only testing but in the calibration. Testing should happen in all areas around the arena including: □ On the ice surface □ Dressing rooms □ Lobby and concession area □ Player benches □ Spectator bleachers Make sure all devices are recertified, calibrated or tested. For more on air-quality control turn to page 46. Ice Resurfacer Evaluate and service the IR(s). Now is the time to fix the non- emergency nuances that you noticed during the busy season. Items that can be done in-house: □ Inspect maintenance logs from the season and identify problems or items that have been noted. □ Check the starter battery and replace if it is 3-5 years old. □ Inspect the overall condition of the machine and components: o IR body o Conditioner and related components o Tires (studs) o Engine and related components o Hydraulic hoses and related components o Battery (battery powered IRs) o Dump tank (interior and lifting components) □ Take an inventory of spare parts. IR Room The room that is used to house the IR is very important and it deserves attention at least once a year to make sure conditions and equipment are maintained. Inspect the walls of the room. Check for any areas that could produce mold. If mold is found anywhere in the IR room, have it removed by a professional company. The floors are continually exposed to water throughout the season. Are there cracks that need to be repaired? Do all of the drains in the room work? Take a look up. Unfortunately ceilings can be neglected because they are out of sight. Do you need to replace any light fixtures? Has there been any damage to pipes or HVAC equipment? Is the exhaust working for the room? We know you want to, but don't ignore the snow pit. Now is the time to drain the water and inspect the inside of the pit. Clean the debris and inspect the conditions. If you have a sump pump, is the pump in working order? Do you have snow melt lines from your compressors? If so, inspect them and make sure that you stay on top of any corrosion. How about the grates? Are they bent? Do you need to replace any of them? Remember, grates for snow pits should be in place at all times. Refrigeration Room Check your refrigeration plant and remedy any custodial issues that exist. This room should not be treated as a dump-all storage room. Floors should be clean and free of any clutter. Parts and supplies should be well organized and inventoried. Are there any reoccurring problems that need to be addressed? Conduct a visual inspection of all electrical, mechanical and plumbing equipment in the room. Look for anything out of the ordinary. It will be beneficial to include your maintenance staff in this inspection as they are familiar with the equipment and can identify out of the ordinary items. Be sure to inspect and test any audible, visual or call-out alarms connected to your system. Alarms only help if they are in working order. Inspect any safety procedures and equipment that are utilized for this room. Be sure your safety equipment is in working order and that you are providing personal protective equipment to all staff members that perform work in the refrigeration room. Contact outside service providers on projects that are beyond you or your staff's capabilities. Once bids have been received and you've determined the needs verses the wants, it's time to pull out the calculator and calendar to determine what can be done and when. Safety issues should always be given the highest priority as well as servicing everyday equipment (like your plant and IR). J Air quality devices are one of the most important elements for the safety and well-being of customers and staff in your rink.