Document

RP002-1.0.5 LoRaWAN Regional Parameters

Issue link: https://read.uberflip.com/i/1540208

Contents of this Issue

Navigation

Page 60 of 115

Regional Parameters RP002-1.0.5 ©2022-2025 LoRa Alliance ® Page 61 of 116 The authors reserve the right to change specifications without notice. 1209 Uplink Data Rate UplinkDwellTime=0 UplinkDwellTime=1 Downlink Data Rate M N M N M N 0 59 51 N/A N/A 0 230 222 1 59 51 N/A N/A 2 59 51 19 11 3 123 115 61 53 4 230 222 133 125 5 230 222 230 222 6 230 222 230 222 7 58 50 58 50 8 Not defined Not defined 8 61 53 9 230 222 230 222 9 137 129 10 230 222 230 222 10 230 222 11 230 222 12 230 222 13 230 222 14 230 222 11:15 Not defined Not defined 1:7 and 15 Not defined Table 44: AU915-928 maximum payload size (repeater compatible) 1210 For AU915-928, DownlinkDwellTime SHALL be set to 0 (no limit). The 400ms dwell time 1211 MAY apply to uplink channels depending on the local regulations. 1212 If the end-device will never operate with a repeater, the maximum application payload length 1213 in the absence of the OPTIONAL FOpts control field SHALL be: 1214 1215 Uplink Data Rate UplinkDwellTime=0 UplinkDwellTime=1 Downlink Data Rate M N M N M N 0 59 51 N/A N/A 0 250 242 1 59 51 N/A N/A 2 59 51 19 11 3 123 115 61 53 4 250 242 133 125 5 250 242 250 242 6 250 242 250 242 7 58 50 58 50 8 Not defined Not defined 8 61 53 9 250 242 250 242 9 137 129 10 250 242 250 242 10 250 242 11 250 242 12 250 242 13 250 242 14 250 242 11:15 Not defined Not defined 1:7 and 15 Not defined Table 45: AU915-928 maximum payload size (not repeater compatible) 1216 1217 1218

Articles in this issue

view archives of Document - RP002-1.0.5 LoRaWAN Regional Parameters