Document

RP002-1.0.5 LoRaWAN Regional Parameters

Issue link: https://read.uberflip.com/i/1540208

Contents of this Issue

Navigation

Page 31 of 115

Regional Parameters RP002-1.0.5 ©2022-2025 LoRa Alliance ® Page 32 of 116 The authors reserve the right to change specifications without notice. The center frequencies of the four RFID channels under ETSI EN 302 576 208 correspond to ChMaskGrp0 = 0x0020, ChMaskGrp1 = 0x4900. 577 Setting these bits would create channels with a higher risk of 578 interference. 579 3.3.1.2 900 MHz Fixed Channel List Definition 580 The 900 MHz fixed channel list defines 96 channels. Channel-ID 0 is 915.1 MHz; channels 581 increase at 100 kHz intervals to Channel-ID 95 at 924.6 MHz. 582 583 The end-device SHALL create an additional channel at the frequency specified by the 584 Channel-ID, numbered sequentially in order of Channel-ID, starting after the last default 585 channel, for each bit set in the CFList. Each newly created channel SHALL be enabled for use 586 with DR0 to DR5 125 kHz modulation. 587 588 These channel definitions represent a superset of common channels in widespread use in AS- 589 923-1, AS-923-2, AS-923-3, AS-923-4, and KR920. 590 591

Articles in this issue

view archives of Document - RP002-1.0.5 LoRaWAN Regional Parameters