Issue link: https://read.uberflip.com/i/1540208
Regional Parameters RP002-1.0.5 ©2022-2025 LoRa Alliance ® Page 36 of 116 The authors reserve the right to change specifications without notice. expressed in dBi. Effective Radiated Power (ERP) is referenced to a half-wave dipole antenna 662 whose gain is expressed in dBd = dBi - 2.15 dB. ERP = EIRP – 2.15 dB. 663 664 TXPower Configuration (EIRP) 0 Max EIRP 1 Max EIRP – 2dB 2 Max EIRP – 4dB 3 Max EIRP – 6dB 4 Max EIRP – 8dB 5 Max EIRP – 10dB 6 Max EIRP – 12dB 7 Max EIRP – 14dB 8..14 RFU 15 Defined in [TS001] 3 Table 13: EU863-870 TXPower 665 By default, the Max EIRP is considered to be +16 dBm. End-devices operating in countries 666 allowing higher EIRP than the default value MAY adapt their default Max EIRP accordingly, 667 but they SHALL NOT exceed the maximum EIRP imposed by the local regulations. If the end- 668 device does not use the default value (+16dBm), the Max EIRP SHOULD be communicated 669 to the Network Server using an out-of-band channel during the end-device commissioning 670 process. 671 3.4.4 EU863-870 Join-Accept CFList 672 The EU863-870 band LoRaWAN implements an OPTIONAL CFList of 16 octets in the Join- 673 Accept message for both CFListType equal to 0 and CFListType equal to 1. When 674 receiving a CFListType equal to 1, it SHALL be interpreted according to the channel list 675 definition in Section 3.3.1.1 (800 MHz Fixed Channel List Definition). 676 3.4.5 EU863-870 LinkADRReq Command 677 The EU863-870 channel plan of LoRaWAN supports a minimum of 24 and a maximum of 80 678 channels. The ChMaskCntl field of the LinkADRReq command has the following meaning: 679 680 ChMaskCntl ChMask Applies To 0 Channels 0 to 15 1 Channels 16 to 31 2 Channels 32 to 47 3 Channels 48 to 63 4 Channels 64 to 79 5 10 LSBs control channel blocks 0 to 9, 6 MSBs are RFU 6 All channels ON: The device SHALL enable all currently defined channels independently of the ChMask field value. 7 RFU Table 14: EU863-870 ChMaskCntl value 681 If ChMaskCntl = 5, the corresponding bits in the ChMask enable and disable a bank of eight 682 channels defined by the following calculation: [ChannelMaskBit * 8, ChannelMaskBit * 8 683 +7]. 684 If the ChMaskCntl field value is RFU, the end-device SHALL 4 reject the command and unset 685 the Channel mask ACK bit in its response. 686 4 Made SHALL from SHOULD starting in LoRaWAN Regional Parameters Specification 1.0.3rA.