Issue link: https://read.uberflip.com/i/1540208
Regional Parameters RP002-1.0.5 ©2022-2025 LoRa Alliance ® Page 98 of 116 The authors reserve the right to change specifications without notice. Transmit power levels relative to the maximum EIRP level of the end-device are indicated in 2009 the following TXPower table: 2010 EIRP refers to the Effective Isotropic Radiated Power, which is the radiated output power 2011 referenced to an isotropic antenna radiating power equally in all directions and whose gain is 2012 expressed in dBi. Effective Radiated Power (ERP) is referenced to a half-wave dipole antenna 2013 whose gain is expressed in dBd = dBi - 2.15 dB. ERP = EIRP – 2.15 dB. 2014 TXPower Configuration (EIRP) 0 Max EIRP 1 Max EIRP – 2dB 2 Max EIRP – 4dB 3 Max EIRP – 6dB 4 Max EIRP – 8dB 5 Max EIRP – 10dB 6 Max EIRP – 12dB 7 Max EIRP – 14dB 8..14 RFU 15 Defined in [TS001] 3 Table 105: RU864-870 TXPower 2015 2016 By default, the Max EIRP is considered to be +16 dBm. If the end-device cannot achieve +16 2017 dBm EIRP, the Max EIRP SHOULD be communicated to the Network Server using an out-of- 2018 band channel during the end-device commissioning process. 2019 3.13.4 RU864-870 Join-Accept CFList 2020 The RU864-870 band LoRaWAN implements an OPTIONAL CFList of 16 octets in the Join- 2021 Accept message for both CFListType equal to 0 and CFListType equal to 1. When 2022 receiving a CFListType equal to 1, it SHALL be interpreted according to the channel list 2023 definition in Section 3.3.1.1 (800 MHz Fixed Channel List Definition). 2024 3.13.5 RU864-870 LinkADRReq Command 2025 The RU864-870 channel plan of LoRaWAN supports a minimum of 24 and a maximum of 80 2026 channels. The ChMaskCntl field of the LinkADRReq command has the following meaning: 2027 2028 ChMaskCntl ChMask Applies To 0 Channels 0 to 15 1 Channels 16 to 31 2 Channels 32 to 47 3 Channels 48 to 63 4 Channels 64 to 79 5 10 LSBs control channel blocks 0 to 9, 6 MSBs are RFU 6 All channels ON: The device SHALL enable all currently defined channels independently of the ChMask field value. 7 RFU Table 106: RU864-870 ChMaskCntl value 2029 If ChMaskCntl = 5, the corresponding bits in the ChMask enable and disable a bank of eight 2030 channels defined by the following calculation: [ChannelMaskBit * 8, ChannelMaskBit * 8 2031 +7]. 2032 If the ChMaskCntl field value is RFU, the end-device SHALL 4 reject the command and unset 2033 the Channel mask ACK bit in its response. 2034