Issue link: https://read.uberflip.com/i/1540208
Regional Parameters RP002-1.0.5 ©2022-2025 LoRa Alliance ® Page 38 of 116 The authors reserve the right to change specifications without notice. of RX1DROffsetACK in RXParamSetupAns, nor a Join-Accept which SHALL be silently 705 ignored. 706 707 Uplink Data Rate Downlink Data Rate in RX1 Slot RX1DROffset 0 1 2 3 4 5 DR0 DR0 DR0 DR0 DR0 DR0 DR0 DR1 DR1 DR0 DR0 DR0 DR0 DR0 DR2 DR2 DR1 DR0 DR0 DR0 DR0 DR3 DR3 DR2 DR1 DR0 DR0 DR0 DR4 DR4 DR3 DR2 DR1 DR0 DR0 DR5 DR5 DR4 DR3 DR2 DR1 DR0 DR6 DR6 DR5 DR4 DR3 DR2 DR1 DR7 DR7 DR6 DR5 DR4 DR3 DR2 DR8 DR1 DR0 DR0 DR0 DR0 DR0 DR9 DR2 DR1 DR0 DR0 DR0 DR0 DR10 DR1 DR0 DR0 DR0 DR0 DR0 DR11 DR2 DR1 DR0 DR0 DR0 DR0 DR12 DR12 DR5 DR4 DR3 DR2 DR1 DR13 DR13 DR12 DR5 DR4 DR3 DR2 Table 17: EU863-870 downlink RX1 data rate mapping 708 The RX2 receive window uses a fixed frequency and data rate. The default parameters are 709 869.525 MHz / DR0 (SF12, 125 kHz) 710 3.4.8 EU863-870 Class B Beacon and Default Downlink Channel 711 The beacon frame content is defined in Section 5.1.3. 5 712 The default beacon data rate is DR3. 713 The default beacon broadcast frequency is 869.525 MHz. 714 The default Class B ping-slot frequency is 869.525 MHz. 715 3.4.9 EU863-870 Relay Parameters 716 The Wake-On-Radio (WOR) default channels are: 717 Channel Index 0 1 Frequency WOR 865.1 865.5 Frequency WOR ACK 865.3 865.9 SF SF9 SF7 BW BW125 Table 18: EU863-870 WOR default channel 718 Note: Attention should be paid to the possible WOR default channels 719 configuration inconsistencies between RP002-1.0.4 and later versions. 720 If the end-device is implementing RP002-1.0.4 and the relay is 721 implementing a later version (or vice versa), only the WOR default 722 channel index 0 will lead to successful communication. 723 5 Prior to LoRaWAN 1.0.4, the EU863-870 beacon format was defined here as: Size (bytes) 2 4 2 7 2 BCNPayload RFU Time CRC GwSpecific CRC