Document

Page 87 of 115

Regional Parameters RP002-1.0.5 ©2022-2025 LoRa Alliance ® Page 88 of 116 The authors reserve the right to change specifications without notice. 3.11.9 KR920-923 Relay Parameters 1807 The Wake-On-Radio (WOR) default channels are: 1808 Channel Index 0 1 Frequency WOR (MHz) 922.7 923.1 Frequency WOR ACK (MHz) 922.9 923.1 SF SF9 SF7 BW BW125 Table 88: KR920-923 WOR default channel 1809 Note: Attention should be paid to the possible WOR default channels 1810 configuration inconsistencies between RP002-1.0.4 and later versions. 1811 If the end-device is implementing RP002-1.0.4 and the relay is 1812 implementing a later version (or vice versa), only the WOR default 1813 channel index 0 will lead to successful communication. 1814 3.11.10 KR920-923 Default Settings 1815 There are no specific default settings for the KR920-923 MHz band. 1816 1817

Articles in this issue

Cover
1 Conventions
2 Introduction
2.1 Country Cross Reference Table
2.2 Regional Parameters Summary Tables
2.2.1 Dynamic Channel Plan Regions
2.2.2 Fixed Channel Plan Regions
2.2.3 Global Data Rates
3 LoRaWAN Regional Parameters
3.1 Regional Parameter Channel Plan Common Names
3.2 Regional Parameter Revision Names
3.3 Default Settings
3.3.1 Join-Accept CFList Type 0
3.3.1 Join-Accept CFList Type 1
3.3.1.1 800 MHz Fixed Channel List Definition
3.3.1.2 900 MHz Fixed Channel List Definition
3.4 EU863-870 MHz Band
3.4.1 EU863-870 Preamble Format
3.4.2 EU863-870 Band Channel Frequencies
3.4.3 EU863-870 Data Rate and End-Device Output Power Encoding
3.4.4 EU863-870 Join-Accept CFList
3.4.5 EU863-870 LinkADRReq Command
3.4.6 EU863-870 Maximum Payload Size
3.4.7 EU863-870 Receive Windows
3.4.8 EU863-870 Class B Beacon and Default Downlink Channel
3.4.9 EU863-870 Relay Parameters
3.4.10 EU863-870 Default Settings
3.5 US902-928 MHz ISM Band
3.5.1 US902-928 Preamble Format
3.5.2 US902-928 Band Channel Frequencies
3.5.3 US902-928 Data Rate and End-Device Output Power Encoding
3.5.4 US902-928 Join-Accept CFList
3.5.5 US902-928 LinkADRReq Command
3.5.6 US902-928 Maximum Payload Size
3.5.7 US902-928 Receive Windows
3.5.8 US902-928 Class B Beacon
3.5.9 US902-928 Relay Parameters
3.5.10 US902-928 Default Settings
3.6 CN779-787 MHz Band
3.7 EU433 MHz ISM Band
3.7.1 EU433 Preamble Format
3.7.2 EU433 ISM Band Channel Frequencies
3.7.3 EU433 Data Rate and End-Device Output Power Encoding
3.7.4 EU433 Join-Accept CFList
3.7.5 EU433 LinkADRReq Command
3.7.6 EU433 Maximum Payload Size
3.7.7 EU433 Receive Windows
3.7.8 EU433 Class B Beacon and Default Downlink Channel
3.7.9 EU433 Default Settings
3.8 AU915-928 MHz Band
3.8.1 AU915-928 Preamble Format
3.8.2 AU915-928 Band Channel Frequencies
3.8.3 AU915-928 Data Rate and End-Device Output Power Encoding
3.8.4 AU915-928 Join-Accept CFList
3.8.5 AU915-928 LinkADRReq Command
3.8.6 AU915-928 Maximum Payload Size
3.8.7 AU915-928 Receive Windows
3.8.8 AU915-928 Class B Beacon
3.8.9 AU915-928 Relay Parameters
3.8.10 AU915-928 Default Settings
3.9 CN470-510 MHz Band
3.9.1 CN470-510 Preamble Format
3.9.2 CN470-510 Band Channel Frequencies
3.9.2.1 Channel Plan for 20 MHz Antenna
3.9.2.2 Channel Plan for 26 MHz antenna
3.9.3 CN470-510 Data Rate and End-Device Output Power Encoding
3.9.4 CN470-510 Join-Accept CFList
3.9.5 CN470-510 LinkADRReq Command
3.9.5.1 Channel Plan for 20 MHz Antenna
3.9.5.2 Channel Plan for 26 MHz Antenna
3.9.6 CN470-510 Maximum Payload Size
3.9.7 CN470-510 Receive Windows
3.9.7.1 Channel Plan for 20 MHz Antenna Systems
3.9.7.2 Channel Plan for 26 MHz Antenna Systems
3.9.8 CN470-510 Class B Beacon
3.9.8.1 Default Beacon and Ping-Slot Channel Numbers and Ping-Slots for 20 MHz Antenna Systems
3.9.8.2 Default Beacon and Ping-Slot Frequencies for 26 MHz Antenna Systems
3.9.9 CN470-510 Relay Parameters
3.9.10 CN470-510 Default Settings
3.10 AS923 MHz Band
3.10.1 AS923 Preamble Format
3.10.2 AS923 Band Channel Frequencies
3.10.3 AS923 Data Rate and End-Device Output Power Encoding
3.10.4 AS923 Join-Accept CFList
3.10.5 AS923 LinkADRReq Command
3.10.6 AS923 Maximum Payload Size
3.10.7 AS923 Receive Windows
3.10.8 AS923 Class B Beacon and Default Downlink Channel
3.10.9 AS923 Relay Parameters
3.10.10 AS923 Default Settings
3.11 KR920-923 MHz Band
3.11.1 KR920-923 Preamble Format
3.11.2 KR920-923 Band Channel Frequencies
3.11.3 KR920-923 Data Rate and End-Device Output Power Encoding
3.11.4 KR920-923 Join-Accept CFList
3.11.5 KR920-923 LinkADRReq Command
3.11.6 KR920-923 Maximum Payload Size
3.11.7 KR920-923 Receive Windows
3.11.8 KR920-923 Class B Beacon and Default Downlink Channel
3.11.9 KR920-923 Relay Parameters
3.11.10 KR920-923 Default Settings
3.12 IN865 MHz Band
3.12.1 IN865 Preamble Format
3.12.2 IN865 Band Channel Frequencies
3.12.3 IN865 Data Rate and End-Device Output Power Encoding
3.12.4 IN865 Join-Accept CFList
3.12.5 IN865 LinkADRReq Command
3.12.6 IN865 Maximum Payload Size
3.12.7 IN865 Receive Windows
3.12.8 IN865 Class B Beacon and Default Downlink Channel
3.12.9 IN865 Relay Parameters
3.12.10 IN865 Default Settings
3.13 RU864-870 MHz Band
3.13.1 RU864-870 Preamble Format
3.13.2 RU864-870 Band Channel Frequencies
3.13.3 RU864-870 Data Rate and End-Device Output Power Encoding
3.13.4 RU864-870 Join-Accept CFList
3.13.5 RU864-870 LinkADRReq Command
3.13.6 RU864-870 Maximum Payload Size
3.13.7 RU864-870 Receive Windows
3.13.8 RU864-870 Class B Beacon and Default Downlink Channel
3.13.9 RU864-870 Relay Parameters
3.13.10 RU864-870 Default Settings
4 Repeaters
4.1 Repeater Compatible Maximum Payload Size
5 Physical Layer
5.1 LoRa Description
5.1.1 LoRa Packet Physical Structure
5.1.2 LoRa Settings
5.1.3 Class B Beacon Frame Content
5.2 FSK Description
5.2.1 FSK Packet Physical Structure
5.2.2 FSK Settings
5.3 LR-FHSS Description
5.3.1 LR-FHSS Physical Layer Description
5.3.2 LR-FHSS Packet Physical Structure
5.3.3 LR-FHSS PHY Layer Settings
5.4 Relay Mechanism [TS011] Regional Parameters
5.4.1 Wake-On-Radio - Physical Parameters
5.4.2 WOR ACK - Physical Parameters
5.4.3 End-Device LoRaWAN Uplink – Physical Parameters
5.4.4 Relay Receive Window (RXR) – Physical Parameters
5.4.5 Default Relay Settings
6 Revisions
6.1 Revision RP002-1.0.5
6.2 Revision RP002-1.0.4
6.3 Revision RP002-1.0.3
6.4 Revision RP002-1.0.2
6.5 Revision RP002-1.0.1
6.6 Revision RP002-1.0.0
7 Glossary
8 Bibliography
8.1 References

view archives of Document - RP002-1.0.5 LoRaWAN Regional Parameters

RP002-1.0.5 LoRaWAN Regional Parameters

Contents of this Issue

Navigation

Page 87 of 115

Articles in this issue