Document

Page 54 of 115

Regional Parameters RP002-1.0.5 ©2022-2025 LoRa Alliance ® Page 55 of 116 The authors reserve the right to change specifications without notice. 3.7.8 EU433 Class B Beacon and Default Downlink Channel 1061 The beacon frame content is defined in Section 5.1.3. 11 1062 The default beacon data rate is DR3. 1063 The default beacon broadcast frequency is 434.665 MHz. 1064 The default class B downlink ping-slot frequency is 434.665 MHz. 1065 3.7.9 EU433 Default Settings 1066 There are no specific default settings for the EU 433 MHz ISM band. 1067 11 Prior to LoRaWAN 1.0.4, the EU433 beacon format was defined here as: Size (bytes) 2 4 2 7 2 BCNPayload RFU Time CRC GwSpecific CRC

Articles in this issue

Cover
1 Conventions
2 Introduction
2.1 Country Cross Reference Table
2.2 Regional Parameters Summary Tables
2.2.1 Dynamic Channel Plan Regions
2.2.2 Fixed Channel Plan Regions
2.2.3 Global Data Rates
3 LoRaWAN Regional Parameters
3.1 Regional Parameter Channel Plan Common Names
3.2 Regional Parameter Revision Names
3.3 Default Settings
3.3.1 Join-Accept CFList Type 0
3.3.1 Join-Accept CFList Type 1
3.3.1.1 800 MHz Fixed Channel List Definition
3.3.1.2 900 MHz Fixed Channel List Definition
3.4 EU863-870 MHz Band
3.4.1 EU863-870 Preamble Format
3.4.2 EU863-870 Band Channel Frequencies
3.4.3 EU863-870 Data Rate and End-Device Output Power Encoding
3.4.4 EU863-870 Join-Accept CFList
3.4.5 EU863-870 LinkADRReq Command
3.4.6 EU863-870 Maximum Payload Size
3.4.7 EU863-870 Receive Windows
3.4.8 EU863-870 Class B Beacon and Default Downlink Channel
3.4.9 EU863-870 Relay Parameters
3.4.10 EU863-870 Default Settings
3.5 US902-928 MHz ISM Band
3.5.1 US902-928 Preamble Format
3.5.2 US902-928 Band Channel Frequencies
3.5.3 US902-928 Data Rate and End-Device Output Power Encoding
3.5.4 US902-928 Join-Accept CFList
3.5.5 US902-928 LinkADRReq Command
3.5.6 US902-928 Maximum Payload Size
3.5.7 US902-928 Receive Windows
3.5.8 US902-928 Class B Beacon
3.5.9 US902-928 Relay Parameters
3.5.10 US902-928 Default Settings
3.6 CN779-787 MHz Band
3.7 EU433 MHz ISM Band
3.7.1 EU433 Preamble Format
3.7.2 EU433 ISM Band Channel Frequencies
3.7.3 EU433 Data Rate and End-Device Output Power Encoding
3.7.4 EU433 Join-Accept CFList
3.7.5 EU433 LinkADRReq Command
3.7.6 EU433 Maximum Payload Size
3.7.7 EU433 Receive Windows
3.7.8 EU433 Class B Beacon and Default Downlink Channel
3.7.9 EU433 Default Settings
3.8 AU915-928 MHz Band
3.8.1 AU915-928 Preamble Format
3.8.2 AU915-928 Band Channel Frequencies
3.8.3 AU915-928 Data Rate and End-Device Output Power Encoding
3.8.4 AU915-928 Join-Accept CFList
3.8.5 AU915-928 LinkADRReq Command
3.8.6 AU915-928 Maximum Payload Size
3.8.7 AU915-928 Receive Windows
3.8.8 AU915-928 Class B Beacon
3.8.9 AU915-928 Relay Parameters
3.8.10 AU915-928 Default Settings
3.9 CN470-510 MHz Band
3.9.1 CN470-510 Preamble Format
3.9.2 CN470-510 Band Channel Frequencies
3.9.2.1 Channel Plan for 20 MHz Antenna
3.9.2.2 Channel Plan for 26 MHz antenna
3.9.3 CN470-510 Data Rate and End-Device Output Power Encoding
3.9.4 CN470-510 Join-Accept CFList
3.9.5 CN470-510 LinkADRReq Command
3.9.5.1 Channel Plan for 20 MHz Antenna
3.9.5.2 Channel Plan for 26 MHz Antenna
3.9.6 CN470-510 Maximum Payload Size
3.9.7 CN470-510 Receive Windows
3.9.7.1 Channel Plan for 20 MHz Antenna Systems
3.9.7.2 Channel Plan for 26 MHz Antenna Systems
3.9.8 CN470-510 Class B Beacon
3.9.8.1 Default Beacon and Ping-Slot Channel Numbers and Ping-Slots for 20 MHz Antenna Systems
3.9.8.2 Default Beacon and Ping-Slot Frequencies for 26 MHz Antenna Systems
3.9.9 CN470-510 Relay Parameters
3.9.10 CN470-510 Default Settings
3.10 AS923 MHz Band
3.10.1 AS923 Preamble Format
3.10.2 AS923 Band Channel Frequencies
3.10.3 AS923 Data Rate and End-Device Output Power Encoding
3.10.4 AS923 Join-Accept CFList
3.10.5 AS923 LinkADRReq Command
3.10.6 AS923 Maximum Payload Size
3.10.7 AS923 Receive Windows
3.10.8 AS923 Class B Beacon and Default Downlink Channel
3.10.9 AS923 Relay Parameters
3.10.10 AS923 Default Settings
3.11 KR920-923 MHz Band
3.11.1 KR920-923 Preamble Format
3.11.2 KR920-923 Band Channel Frequencies
3.11.3 KR920-923 Data Rate and End-Device Output Power Encoding
3.11.4 KR920-923 Join-Accept CFList
3.11.5 KR920-923 LinkADRReq Command
3.11.6 KR920-923 Maximum Payload Size
3.11.7 KR920-923 Receive Windows
3.11.8 KR920-923 Class B Beacon and Default Downlink Channel
3.11.9 KR920-923 Relay Parameters
3.11.10 KR920-923 Default Settings
3.12 IN865 MHz Band
3.12.1 IN865 Preamble Format
3.12.2 IN865 Band Channel Frequencies
3.12.3 IN865 Data Rate and End-Device Output Power Encoding
3.12.4 IN865 Join-Accept CFList
3.12.5 IN865 LinkADRReq Command
3.12.6 IN865 Maximum Payload Size
3.12.7 IN865 Receive Windows
3.12.8 IN865 Class B Beacon and Default Downlink Channel
3.12.9 IN865 Relay Parameters
3.12.10 IN865 Default Settings
3.13 RU864-870 MHz Band
3.13.1 RU864-870 Preamble Format
3.13.2 RU864-870 Band Channel Frequencies
3.13.3 RU864-870 Data Rate and End-Device Output Power Encoding
3.13.4 RU864-870 Join-Accept CFList
3.13.5 RU864-870 LinkADRReq Command
3.13.6 RU864-870 Maximum Payload Size
3.13.7 RU864-870 Receive Windows
3.13.8 RU864-870 Class B Beacon and Default Downlink Channel
3.13.9 RU864-870 Relay Parameters
3.13.10 RU864-870 Default Settings
4 Repeaters
4.1 Repeater Compatible Maximum Payload Size
5 Physical Layer
5.1 LoRa Description
5.1.1 LoRa Packet Physical Structure
5.1.2 LoRa Settings
5.1.3 Class B Beacon Frame Content
5.2 FSK Description
5.2.1 FSK Packet Physical Structure
5.2.2 FSK Settings
5.3 LR-FHSS Description
5.3.1 LR-FHSS Physical Layer Description
5.3.2 LR-FHSS Packet Physical Structure
5.3.3 LR-FHSS PHY Layer Settings
5.4 Relay Mechanism [TS011] Regional Parameters
5.4.1 Wake-On-Radio - Physical Parameters
5.4.2 WOR ACK - Physical Parameters
5.4.3 End-Device LoRaWAN Uplink – Physical Parameters
5.4.4 Relay Receive Window (RXR) – Physical Parameters
5.4.5 Default Relay Settings
6 Revisions
6.1 Revision RP002-1.0.5
6.2 Revision RP002-1.0.4
6.3 Revision RP002-1.0.3
6.4 Revision RP002-1.0.2
6.5 Revision RP002-1.0.1
6.6 Revision RP002-1.0.0
7 Glossary
8 Bibliography
8.1 References

view archives of Document - RP002-1.0.5 LoRaWAN Regional Parameters

RP002-1.0.5 LoRaWAN Regional Parameters

Contents of this Issue

Navigation

Page 54 of 115

Articles in this issue